Beige Rockface wall cladding Panel
Beige Oyster rock face wall cladding Panel
Rockface stackedstone wall cladding panel tile. The running water Beige is a Quartzite that is produced using thin pieces of natural pieces of stone that are bonded together to form a Z shaped panel which when fitted to a wall gives a seamless appearance. The size of the tile is 600mm x 150mm x 10-20mm in thickness and is very easy to install. Suitable for both inside and outside building projects and very often used in creating feature walls and fire places.
Suitable for application onto most sub surfaces but if you require any information on your particular installation then please feel free to contact us where we can give you some more information
Lightweight stone cladding veneer
Eazyclad Light weight stone cladding Panel
When a specific look is required on a wall no matter if internal or external then our New lightweight stone cladding panel veneer could be just what you are looking for. Simple to use and very cost effective but also produces a stunning appearance. Will fix to most types of wall surfaces and is sold by the box so very little wastage is created .
No matter what you are wishing to create from a garden wall to a fireplace then this cladding stone panel this could be the product for you
Stone clad Z shaped cladding Panel system internal uses
Stone Clad is a internal or external Z shaped cladding panel system and are made of cut slips of Natural stone that have been set into a cement backing with a fixing clip that is already attached. The built in fixing clip can be used when the panel is set to the wall as a secondary fixing and should be used over 2.2 metres. Creating feature walls and fireplaces is simple and cheaper than with real size stone
We are often asked where our brick slips can be used and one of the most commonly asked is can they be attached to plasterboard. There is no problem with sticking our deco and Cottager range directly to the plasterboard you may want to PVA the board prior but this is not always required a far better option if it is possible is to use a tile backer board this is more rigid and designed to take tiles which is basically what a brick slip is also it is generally produced using a cement based product against the paper of Gypsum board
Red Multi Wire Cut Brick Slips
19th Century Wire Cut Brick slips Red Multi Reclaimed Effect
Reclaimed Red Multi Wire cut brick slips are the ideal choice if you are looking for a 19th Century Brick These are larger than our range of Rustic brick Cast bricks and their dimensions are ideal for fitting in with imperial sized larger full sized Building brick. Suitable for Cladding com,poet houses or just a feature wall as they are suitable for using inside and out side of the home or work place. Many people also use them for building fireplaces to sit either a wood burner or muti fuel stove into. The size of each cladding slip is approx 230mm x 75mm by 20mm in thickness or inn inches 9 inches x 3 inches x 3/4 inch
Keeping you up to date with all cladding and natural stone products