What is a fireplace chamber insert panel
We are always asked what is a fireplace chamber insert panel is they are used to line the linside of chimney breast where your wood burner , multi fuel stove is to fit some people call it the inglenook as well. The main feature and sole purpose of a chamber insert is really to tidy up the inside of the fire place so it is appealing to the eye.
They come in many different sizes and materials we specialise in Split face cladding panels which give a very modern look and are made generally from natural stone fixed onto a cement board. The other type we do is a Brick slip one which is very popular in households arcross the UK and as we make our own slips we can do many various types.
Some people do not buy the full chamber on the board but instead just attached the cladding you are using or bricks direct onto the 3 internal walls of the hearth area.
They come in many different sizes and materials we specialise in Split face cladding panels which give a very modern look and are made generally from natural stone fixed onto a cement board. The other type we do is a Brick slip one which is very popular in households arcross the UK and as we make our own slips we can do many various types.
Some people do not buy the full chamber on the board but instead just attached the cladding you are using or bricks direct onto the 3 internal walls of the hearth area.
|
What does a brick fireplace chamber look like ?These brick fireplace chamber insert panels come in 3 sections the back section normally the largest are attached to rear of the fire pit and the 2 side panels as it suggest go wither side of the fireplace opening, They are very easy to cut with a 4 inch angle grinder and really do finish off any room where a new fire is being installed.
We often find that people worry about the hearth and the log burner or stove they are having installed but do forget about one of the major factors the surrounding area inside the Chamber .place. |
What is a split face fireplace chamberSplit face also known as rock panel, 3 d stone and stacked stone and is a term that is used to describe the material used in a fire place chamber generally they are made of natural Slate or quartz material that have been bonded together to form a tile the ones we use are a Z shape which gives a seamless joint and are easy to cut with a 4inch angle iron.
Split face are probably one of our best selling linings and the multi rustic slate one is the best seller as it looks great when used in any colour scheme room |
|
|
If you would like to know more on the range of Eazyclad fireplace place chamber inset panels then feel free to contact us on the form opposite and please remember we also produce slate hearths why not have a look at them now
Why not buy a sample of the stone we use to clad the fireplace chambers with
|
|