Birkdale Blend Brick Fire Place Chamber Lining
The Birkdale Blend brick fireplace chamber lining panels offer trade dealers, fireplace installers, and homeowners the perfect way to frame a wood burner, multi-fuel stove, or gas fire with timeless character.
Pre-fabricated onto a high-performance, non-combustible backer board, these panels feature genuine brick slips securely bonded and pointed with a traditional sand and cement mortar mix. At approximately 30mm thick, they deliver the depth and texture of real masonry without encroaching on valuable space inside an inglenook opening or standard chimney recess.
The Birkdale Blend stands out for its warm, rustic appeal, combining soft red, buff, and weathered charcoal tones with subtle tumbling and textured faces. This multi-tonal mix replicates the look of historic, reclaimed brickwork, making it an ideal, hassle-free upgrade for transforming existing fireplaces or adding instant authenticity to a new stove installation.
Standard Sizing & Components
Each standard sized chamber comes in 3 parts 1 back panel and 2 side panels, if you need any wider than 900mm for the rear section these will come in equal 2 parts i.e. 1260mm wide one will come as 2 x 630mm pieces
- Back Panel 800 mm (W) × 900 mm (H)
- Side Panels (×2) 400 mm (W) × 900 mm (H)
-
Wider than 900 mm
Supplied as 2 equal pieces
(e.g. 1260 mm → 2 × 630 mm)
Helpful Guides & Related Chambers
| Cutting Guide: How To cut Fireplace Chambers | |
| Installation Guide: How To install Fireplace Chambers | |
| Catalogue: More Fireplace Chambers |
Related Products
Stone CladdingCreative ideas for Stone Cladding for internal walls and external facades of buildings that are available in single stone slips or stone cladding systems for commercial or residential house properties as well as decorative stone wall cladding. |
Brick SlipsOur brick slips are produced to replicate real bricks but are only a fraction of the thickness and weight hence the name they are very often given of slim or thin bricks and are suitable for cladding internal and externals of buildings. |
Hearth StonesWe specialise in slate for fireplace hearths but do carry a small range of Silver Granite with a flamed surface and Sandstone in large size slabs we an also cut to size the following Hearth stones, round, square, half circle, teardrop, and bespoke T shape |